Expert Answers about Land Rover LR3

• Wiring 2009 Land Rover LR2 for Electric Trailer Brakes
• To actuate the electric brakes on the horse trailer, you will need to install a brake controller in your Land Rover. I would recommend a proportional controller, such as the Tekonsha Prodigy P2, part # 90885. The Prodigy is one of our best selling controllers, has been for years primarily because it works great and is very easy to use. You will also need the Brake Controller Installation Kit with 6-way connector, part # ETBC6, which includes the adapter you were mentioning. The installation...
  view full answer...


• Do the Load Resistors in the Load Resistor Kit for LED Turn Signals Have + and - Markings
• No, there is not a positive (+) and negative (-) on the ends of the Load Resistor Kit for LED Turn Signals # DI34ZR. It does not matter which side connects to the positive and which to the ground. I have included a couple wiring diagrams you can check out to help with installation.
  view full answer...


• Does the Install of Curt Hitch 13456 on a 2006 Land Rover LR3 Require Spare Tire Removal
• Curt states that a full-sized spare will not fit on your 200 Land Rover LR3 with their hitch part # 13456 installed at the same time. You might consider tracking down a smaller spare so that you can still have a spare with this hitch installed. We had the chance to install this hitch on a 2006 Land Rover LR3 just like yours. Check out the video I attached that will walk you through the install. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900....
  view full answer...


• Is a Converter Box Required on a 2006 Land Rover LR3
• There are two reasons you need to use a wiring harness with a powered converter box on your 2006 Land Rover LR3 which are power and configuration. The electrical circuit on your LR3 is not equipped to handle the additional power draw the trailer lights will have on the system which will cause the fuses to blow. The powered converter box draws power from the battery for the trailer lights which eliminates power draw on the vehicle's electrical circuits. The other reason is that your LR3...
  view full answer...